ProRend Float is suitable for application on dense concrete clock and sound masonry backgrounds, indoors as well as outdoors. It can be either a smooth finish, sponge texture or keyed.

Scaffolding must be tied independently to allow uninterrupted application. Any faults in the structure must be rectified.

Do not apply when substrate/ air temperature is below 5^oC or above 30^oC. Protect areas before and after application.

ProRend Float can be applied on to all sound supporting masonry backgrounds. Background has to be free from frost, dust, loose particles, damp and other pollution which can interfere.

All surfaces must be dry, sound, clean, reasonably smooth and free from loose material, oil and grease. Protect fresh render work against weather influences.

Mix dry ProRend Float with tap water. Apply by hand or machine in one or several layers, depending on the desired thickness. Allow every layer to harden and dry. Each layer must not be thicker than 20 mm. Protect fresh render against rapid drying. Allow minimum layer thickness of 10-15 mm.

~ 1.25 kg/m² for each mm thickness.

Curing with clean water may be necessary during rapid drying conditions.

Cover parts which do not have to be treated with paper and tape. Remove directly after applying the primer.

All equipment must be cleaned immediately after use with water. Waste material should not be emptied into any drainage system.

25 kg paper bag

40 bags per pallet

ProRend Float can be kept for ~6 months if stored in clean, dry conditions.

CS11 or P11

Lime and Cement

~ 1.2 mm

Perlite

~ 5.7 l /per 25 kg

~ 1.3 kg/dm³

~ 1.4 kg/dm³

~ 3 N/mm²

~ 1.4 N/mm²

~ 2800 N/mm²

W2

5/20

Lightweight render, flexible, easy to apply by hand or machine. Surface tension between render and background is minimised. After hardening Float is weather-resistant and a thermal insulant.

High quality, factory composed dry mortar. Binding agent and approved additives for better workability.